RouterOS 6.46.7 [Long-term] がリリース

RouterOS 6.46.7 [Long-term]
日時: Mon, 14 Sep 2020 08:44:02 +0300
Channel: Long-term

6.46.7 changelog:

Important note!!!

- The Dude server must be updated to monitor v6.46.4+ and v6.47beta30+ RouterOS type devices.
- The Dude client must be manually upgraded after upgrading The Dude server.
- The Dude requires "winbox" policy instead of "dude" to monitor v6.46.4+ and v6.47beta30+ RouterOS type devices.

Changes since 6.46.6:

*) arm - improved stability when forcing 25G speed on unsupported interface;
*) bridge - fixed host table update on SNMP query;
*) bridge - fixed STP alternate and backup port states for devices with switch chip;
*) crs3xx - fixed hardware offloaded MPLS forwarding when using bonding interfaces;
*) crs3xx - fixed QSFP+ interface LEDs when using break-out cable for CRS326-24S+2Q+;
*) crs3xx - fixed switch ACL rules for CRS312, CRS326-24S+2Q+ and CRS354 devices;
*) crs3xx - fixed switch port "egress-rate" removal for CRS305, CRS326-24G-2S+, CRS328, CRS318 devices;
*) crs3xx - improved 10G interface initialization on CRS312 devices;
*) crs3xx - improved Ethernet port group traffic forwarding on CRS354 devices;
*) crs3xx - improved system stability when using hardware offloaded MPLS;
*) defconf - fixed default configuration loading on RBmAPL-2nD;
*) dhcpv6-server - disallow changing binding's "prefix-pool";
*) dhcpv6-server - do not require "server" parameter for bindings;
*) discovery - do not send discovery packets on inactive bonding slave interfaces;
*) discovery - do not send discovery packets on interfaces that are blocked by STP;
*) dot1x - fixed duplicate EAP request packets for server;
*) dot1x - fixed EAP packet version numbering;
*) email - added support for multiple "to" recipients;
*) export - fixed HotSpot "address-per-mac" parameter export;
*) fetch - show status "uploaded" instead of "downloaded" when uploading a file;
*) ftp - fixed possible buffer overflow;
*) hotspot - ignore packets from host while MAC authentication is in progress;
*) ike1 - improved stability when performing policy lookup on non-existant peer;
*) ike2 - fixed local side NAT detection;
*) ike2 - fixed policy reference for pending acquire;
*) ike2 - retry RSA signature validation with deduced digest from certificate;
*) interface - added new builtin "static" interface list;
*) kidcontrol - fixed "time-unlimited-rate" to engage in correct time;
*) lcd - improved general system stability when LCD is not present;
*) lte - fixed modem initialization when multiple modems are used simultaneously;
*) lte - fixed PDP authentication configuration for SIM7600;
*) lte - improved stability during firmware upgrade;
*) metarouter - fixed image importing (introduced in v6.46);
*) ospf - fixed disappearing NSSA default route;
*) ospf - fixed processing of "unknown" LSA type;
*) ospf - improved route tag processing for OSPFv3;
*) poe - fixed "power-cycle" functionality on hEX PoE, PowerBox Pro and OmniTIK 5 PoE ac;
*) port - removed serial console port on hEX S;
*) ppp - removed "comment", "set" and "edit" commands from "PPP->Active" menu;
*) profile - added support for CCR2004-1G-12S+2XS;
*) qsfp - fixed auto-negotiation status;
*) quickset - fixed invalid configuration applying when performing changes during LTE modem initialization process;
*) quickset - show "Antenna Gain" setting on devices without built-in antennas;
*) route - improved stability when 6to4 interface is configured with disabled IPv6 package;
*) routerboard - fixed "reset-button" menu presence on all devices;
*) routerboot - fixed etherboot FCS errors with 100Mbps rate for CRS305, CRS309 and CRS317 devices ("/system routerboard upgrade" required);
*) sfp - stabilized CRS212 SFP port functionality and improved monitoring of optical modules;
*) smb - fixed file path validation (introduced in v6.46);
*) smb - fixed possible memory leak (CVE-2020-11881);
*) smb - limit active session count to 5 per connection;
*) sniffer - allow setting port for "streaming-server";
*) snmp - added "dot1qTpFdbTable" OID reporting for Q-BRIDGE-MIB;
*) switch - correctly enable and disable CPU Flow Control on RB3011UiAS;
*) switch - fixed MAC address learning on switch-cpu port for Atheros8316, Atheros8227 and Atheros7240 switch chips;
*) upgrade - fixed space handling in package file names;
*) w60g - added "mdmg-fix" parameter for RBwAP60Gx3 (CLI only);
*) w60g - improved rate selection in low traffic conditions;
*) webfig - fixed 5 GHz wireless interface "frequency" parameter value list on Audience;
*) winbox - added "region" parameter for W60G interfaces;
*) winbox - allow to specify any Ethernet like interface under "Tool/WoL" menu;
*) winbox - do not allow to enter empty strings in "caps-man-names" and "common-name" parameters;
*) winbox - fixed "Tx/Rx Signal Strength" value presence for 4 chain interfaces;
*) winbox - fixed wireless interface "HT" tab setting presence when "band=5ghz-n/ac";
*) winbox - fixed wireless sniffer parameter setting;
*) winbox - hide irrelevant switch port parameters;
*) wireless - added support for U-NII-2 for cAP ac;
*) wireless - added support for U-NII-2 for wAP ac;
*) wireless - allow setting "tx-power" up to 40;
*) wireless - changed "station-roaming" default setting from "enabled" to "disabled";
*) wireless - fixed potential wireless driver issue related to CVE-2020-3702;
*) wireless - improved management service stability when receiving bogus packets;
*) wireless - updated "bangladesh" regulatory domain information;
*) wireless - updated "canada" regulatory domain information;
*) wireless - updated "egypt" regulatory domain information;
*) wireless - updated "indonesia5" regulatory domain information;
*) wireless - updated "united states" regulatory domain information;
*) www - added "tls-version" parameter in "IP->Services" menu;

Download the new 'RouterOS 6.46.7' version here: