RouterOS 7.3beta33 [Testing] がリリース

RouterOS 7.3beta33 [Testing]
日時: Wed, 13 Apr 2022 13:50:46 +0300
Channel: Testing
リンク: MikroTik Routers and Wireless - Software

7.3beta33 changelog:

*) bgp - added initial support for prefix limit;
*) bonding - added "lacp-user-key" setting;
*) ccr - added visible "passthrough" flag for interfaces on CCR2004-1G-2XS-PCIe;
*) ccr - usability and stability improvements for passthrough interfaces on CCR2004-1G-2XS-PCIe;
*) cd-install - allow selecting on which drive to install RouterOS;
*) conntrack - limited full Connection Tracking warning to 1 message per minute;
*) dhcpv4-server - added "age" parameter for dynamic leases;
*) dhcpv4-server - fixed conflicting or declined lease detection when IP pool differs from server's configuration;
*) filesystem - improved UBIFS stability and data integrity after downgrade to RouterOS v6 and upgrade to RouterOS v7;
*) gps - added GPS package support for Chateau devices;
*) ipv6 - added "ra-preference" parameter support for RA;
*) ipv6 - removed bogus commands from IPv6 neighbors menu;
*) l3hw - improved route table offloading for CRS317, CRS309, CRS312, CRS326-24S+2Q+, CRS354, CRS5xx, CCR2x16 devices;
*) leds - fixed wireless related LED behavior with WW2 package;
*) lora - do not allow setting non-existing forwarding server;
*) lora - fixed bogus TOO_EARLY errors;
*) lora - removed TX lookup table;
*) lte - added MCS, CQI and RI value reporting for Fibocom FG621;
*) lte - added SMS sending support for MBIM protocol;
*) lte - added support for generic PXA1802 based modems;
*) lte - disabled wait for LTE auto attach;
*) lte - expose diagnostics channel for all modems;
*) lte - fixed LTE firwmare upgrade on RBLtAP-2HnD with R11e-LTE6;
*) lte - fixed Sierra MC7455 modem initialization;
*) lte - hide slave interfaces from export;
*) lte - improved stability when configuring multiple APN's at the same time in MBIM mode;
*) lte - improved stability when upgrading LTE firmware on Chateau 5G;
*) mlag - fixed MAC address moving between bridge ports;
*) mpls - do MPLS forwarding for nexthops without mappings;
*) mpls - fixed MPLS forwarding after any interface configuration parameter is changed;
*) ntp - fixed "use-local-clock" behavior when enabling server;
*) ovpn - fixed memory leak on TILE architecture;
*) ovpn - fixed packet processing on MT7621A;
*) ovpn - improved service stability when outbound packets are blocked by firewall in UDP mode;
*) ovpn - improved service stability when processing frequent disconnects in UDP mode;
*) port - do not loose "parity" setting;
*) route - fixed "nexthop" table printing;
*) route - fixed "table" menu emptying after RouterOS upgrade;
*) route - fixed static routes in VRF becoming invalid after reboot;
*) route-filter - fixed community matchers;
*) routerboard - fixed USB bus numbering on LtAP and M33G;
*) routerboot - added extra shortcut information on how to boot into etherboot;
*) sfp - added 2.5Gbps rate for SFP+ and QSFP+ interfaces on 98DXxxxx and 98PX1012 switches (requires disabled auto-negotiation);
*) sfp - improved Q/SFP interface initialization and stability for 98DXxxxx and 98PX1012 switches;
*) snmp - hide Vendor ID in DHCP MIB when branding is present;
*) supout - added IGMP-Proxy section;
*) supout - added NTP servers section;
*) supout - added PIMSM section;
*) supout - added RIP section;
*) supout - added WireGuard section;
*) switch - added option to match source and destination IP addresses in ARP packets for RB5009 (requires mac-protocol=arp setting);
*) system - fixed IP service initialization in VRF after system startup;
*) torch - properly capture all related IPv6 traffic;
*) tr069-client - fixed RPC download of "1 Vendor Configuration File" with branding package;
*) upnp - improved stability when processing incomplete HTTP header;
*) user-manager - added "Acct-Interim-Interval" to predefined attribute list;
*) w60g - improved stability on Cube 60Pro ac and CubeSA 60Pro ac;
*) webfig - properly show all routing table content;
*) winbox - added "ra-preference" parameter under "IPv6/ND" menu;
*) winbox - added SKID and AKID parameters under "Certificate" menu;
*) winbox - added warning message for LTE upgrade process;
*) winbox - do not auto start Wireless Sniffer when opened;
*) winbox - do not show "unknown" area under "Routing/OSPF/LSA" menu;
*) winbox - do not show type value for NXDOMAIN entries under "IP/DNS/Cache" menu;
*) winbox - fixed graph drawing in QuickSet;
*) winbox - fixed hex type values under "User Manager" menu;
*) winbox - fixed typo in ZeroTier instance title;
*) winbox - minimal required version is v3.33;
*) winbox - moved "src-address-list" and "dst-address-list" parameters to "General" tab under "IP/Firewall" menu;
*) winbox - properly clean up SFP module information after it is unplugged;
*) winbox - properly clean up disk after a failed file upload;
*) winbox - show "System/RouterBOARD/Mode Button" on devices that have such feature;
*) winbox - show PVID column by default under "Bridge" menu;
*) winbox - take into account timezone for timed values under "User Manager" menu;
*) wireless - fixed "wmm-support=required" checking;
*) wireless - fixed EAP-TLS authentication;
*) wireless - fixed GUD version in 3gpp information;
*) ww2 - fixed VLAN tag handling;
*) x86 - improved support for Intel E810 NIC;
*) zerotier - added support for Controller configuration;

Download the new 'RouterOS 7.3beta33' version here: https://mikrotik.com/download